Alarm Clock Configuration - Televes 711701 User Manual

User manual
12.3.5.- Wakeup Timer Configuration
Using this menu you can turn the receiver On/Off at a previously
programmed time.
You can program several events with different execution frequencies (once
daily, weekly, etc... )..
Timer N°
Using buttons CH+ / CH- locate the cursor on parameter "Timer N°".
Using the buttons /
CH+ / CH- select one of the 8 options available. Press OK to accept.
If any one of the timers is enabled, the cursor will self-locate on the next
one available.
Timer Mode
Using buttons CH+ /
Mode". Using the buttons
Daily, Weekly or Yearly.
Wakeup Mode
Using buttons CH+ / CH- locate the cursor on parameter "Wakeup
Mode". Using the buttons
Message (shows a message on screen), Program (shows the program
selected), ON (turns the receiver on without a preset turnoff time) or
Recorder (records the selected programme on the external disk or pen
drive).
Wakeup Channel
Select the message or channel that will be shown on screen when the
alarm clock is enabled. Depending on the mode set in the previous item,
a message or a channel will be displayed.
To do so, using buttons CH+ / CH- locate the cursor on parameter
"Wakeup Channel". Then using
Wakeup Date
Select the date for enabling the alarm clock.
To do so, using buttons CH+ / CH- locate the cursor on parameter
"Wakeup Date". Using buttons
should indicate the day. Press OK to accept.
On Time
Indicate the time when the alarm should be activated.
To do so, using buttons CH+ / CH- locate the cursor on parameter
"On Time" and on the numerical keyboard type in the activation time.
Duration
Indicate event duration.
To do so, using buttons CH+ / CH- locate the cursor on parameter
"Duration" and on the numerical keyboard type in the duration of the
event.
Default Partition
Select the disk in which the programme indicated for the alarm clock
mode will be recorded.
Finally press button OK to confirm the change of parameters.
switch to the timer list, and using the buttons
CH- locate the cursor on parameter "Timer
/ select one of the options: OFF, Once,
/ select one of the options: Off (disabled),
/ select the desired type.
/ a calendar is enabled on which you
67
"SCART DVB-T 711701"