Switching The Traffic Assist On/Off - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

>>> GERNERAL OPERATION
Audio signal output
You can connect your Traffic Assist to
> EN
your audio system using an optionally
available cable for output of the audio sig-
nal.
If the cable is correctly connected, you can
then output the audio signal via the vehi-
cle audio system.
External microphone
You can connect an external microphone
to your Traffic Assist using an optionally
available cable.
26
Switching the Traffic Assist
On/Off
The unit is switched on and off using the
key .
WARNING
Deactivate the Becker moodlights while
driving in your vehicle in order to pre-
vent visual distraction from the road traf-
fic.
Switching On
> Set the On/Off switch on the left side of
the unit to On.
> Press the key
for a few seconds.
The unit is switched on. The manufactur-
er's logo appears on the touchscreen.
The following question appears shortly
thereafter:
> If you agree with this request, press the
key.
OK
NOTICE
The Traffic Assist may only be used in ac-
cordance with the applicable traffic regu-
lations.