Unit Bracket - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

Switching Off
You can switch the unit off at any time. If
necessary, new destinations should first be
saved.
> Press the key
for a few seconds.
The unit will enter sleep mode.
> Switch the On/Off switch to Off for fi-
nal deactivation of the unit.
Note:
We recommend that you place the Traf-
fic Assist in sleep mode in the event of
short interruptions to operation (up to a
week).
This significantly reduces the switch-on
time and the Traffic Assist finds the satel-
lites required for navigation much faster.

Unit bracket

The Traffic Assist can be attached directly
to the windshield with the unit holder.
NOTICE
Please check local and state traffic regula-
tions prior to installation of the unit. For
example, there may be regulations in
your state which forbid mounting the
unit/bracket on the
HARMAN/BECKER assumes no liabili-
ty for driver errors or the non-observance
of applicable laws.
Note:
The Traffic Assist and unit bracket must
not be exposed to long periods of direct
sunlight. Temperatures inside the vehicle
of +70 C and higher may damage parts of
the bracket.
GERNERAL OPERATION
6
windshield.
5
4
1 Fastening screw
2 Fastening screw
3 Lever
4 Suction surface
5 Base
6 Unit holder
7 Clip
>>>
> EN
7
1
2
3
27