Becker TRAFFIC ASSIST 7977 Instructions For Use Manual page 45

Using the list of towns
If you have already entered some of the
letters of the town you want, you can use
the list function to display all the towns
containing the combination of letters in
question.
> Press the button
at the top right
corner of the screen in order to open the
list of towns.
> A town is selected by pressing the corre-
sponding button.
Selecting the street
In the destination street area, the street
and building number can be entered sep-
arately using a letter and numerical key
panel. A possible street is displayed each
time a new letter is entered.
Traffic Assist rules out all impossible com-
binations of letters, and only activates
those letter boxes which will produce an
existing street.
A building number can only be selected
once the street has been selected and/or if
building numbers are also present in the
data.
> Press the letters of the destination street
one after another.
The OK key
The key can be used to transfer
OK
the destination selected into the route cal-
culation menu. If the destination required
appears in the upper edge of the display
once the first letters or numbers have been
entered, you can transfer the destination
immediately with without using the
OK
list function.
> Press the key to transfer your desti-
OK
nation into the route calculation menu.
NAVIGATIONAL MODE
Using the list of streets
If you have already entered some of the
letters of the street you want, you can use
the list function to display all the streets
containing the combination of letters in
question.
> Press the button
at the top right
corner of the screen in order to open the
list of streets.
> The street is selected by pressing the
corresponding button.
Note:
You can display further information
regarding the street by pressing the field
to the left of the street name. This can be
helpful if the street being searched for
appears several times in the list.
>>>
> EN
45