Power Supply; Using The Battery; Connecting To The Socket; Connecting Up To Power Supply - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

Power supply

Note:
You can charge the Traffic Assist via the
car charger cable included in the scope of
delivery or via the optionally-available
grid power supply unit.
When the Traffic Assist is connected to a
PC, it is supplied with power via the PC
and does not consume battery power.

Using the battery

The internal power supply is via the inte-
grated rechargeable battery. The recharge-
able battery is maintenance-free and does
not require any particular care.
Note:
Note that if the battery is completely dis-
charged, it may take up to a minute be-
fore the device can be switched on again.
Note:
In the event of a defective battery, please
contact your authorized dealer. Please do
not attempt to remove the battery your-
self.
GERNERAL OPERATION

Connecting to the socket

DANGER
Danger to life by electrocution.
Make sure that your hands are not damp
and that the grid section is dry. Only
connect the grid section to a suitable
grid supply.

Connecting up to power supply

Connection to the public mains grid is
achieved using the optionally-available
grid power supply unit. Please proceed as
follows to connect to the grid:
> Hold the USB connector at the corru-
gated grip area and push it into the con-
necting socket to the stop without
employing excessive force.
>>>
> EN
23