Table of Contents
Advertisement
Installing the Projector
Other Settings
Settings related to basic operations
Purpose
To start/stop projection by turning
on/off the main power or plugging
in or unplugging the power plug of
the projector.
To disable the automatic shutdown
function.
To disable buzzer beeps generated
when the projector is powered on/
off.
To operate the projector by
communication command even
when the power of the projector is
off.
To operate the projector by
communication command while
executing A/V Mute.
To turn off the power by pressing
the [t] button once.
Setting Methods
Set Direct Power On to On. (Default value: Off)
s Extended - Operation - Direct Power
On
p.133
The projector can be powered off directly by the
breaker because it supports the direct shutdown
function.
Set Sleep Mode to Off. (Default value: On)
s Extended - Operation - Sleep Mode
Set A/V Mute Timer to Off.
s Extended - Operation - A/V Mute Settings -
A/V Mute Timer
p.133
Set Beep to Off. (Default value: On)
s Extended - Operation - Advanced - Beep
p.133
Set Standby Mode to Communication On.
(Default value: Communication Off)
s Extended - Standby Mode
p.133
Set A/V Mute Release to A/V Mute.
s Extended - Operation - A/V Mute Settings -
A/V Mute Release
p.133
The default value is Any Button. If you operate
the projector while A/V Mute is on, A/V Mute is
released.
Set Standby Confirmation to Off. (Default value:
On)
s Extended - Display - Standby Confirmation
p.133
Settings related to display
Purpose
To change the menu position.
To change the menu direction.
To prevent the display of menus,
messages, or warnings on the
screen.
p.133
To disable the display of the
message on the projection screen
when switching the source.
To reduce the display delay of the
image.
Setting Methods
Change the settings of Menu Position.
s Extended - Display - Menu Position
Change the settings of OSD Rotation.
s Extended - Display - OSD Rotation
Use User Button to set On-Screen Display to
User Button 1, User Button 2, or User Button
3.
s Settings - User Button
p.131
When you press the button for which On-Screen
Display is assigned, menus or messages are not
displayed on the screen. When the same button is
pressed, they are displayed again. If On-Screen
Display is enabled, you cannot operate the
Configuration menu (except switching the color
mode and input source).
Set Messages to Off. (Default value: On)
s Extended - Display - Messages
p.133
You can confirm warning by the display of the
indicator.
s "Reading the Indicators"
p.157
Dialogs related to operations and behaviors, laser
warnings, termination of Message Broadcasting,
and projector ID are displayed.
Set Image Processing to Fast 1 or Fast 2.
s Signal - Advanced - Image Processing
p.129
43
p.133
p.133
Advertisement
Table of Contents
