Using The Dive Plan Mode; Switching The Display - Citizen D710 Instruction Manual

Using the Dive Plan Mode

This mode is used to set the plan for the next dive. The dive plan mode uses the three
displays described below.
• Dive Condition Display: This lets you change between AIR diving and NITROX diving and
• Dive Plan Display:
• Dive Alarm Display: This lets you display and set the depth alarm and dive time alarm.

1. Switching the Display

The display changes each time the lower right button (A) is pressed once in the dive plan
mode. The displayed contents differ between when the watch is set to AIR and when it is
set to NITROX diving.
<AIR Diving>
[Dive Condition Display]
(C)
(D)
<NITROX Diving>
[Dive Condition Display]
Oxygen concentration
(C)
(D)
Limit depth
relative to
oxygen
concentration
set the oxygen concentration (O
current settings.
This lets you display the number of the next dive for repetitive diving,
a graph of the body nitrogen level, and the no-decompression limit
time corresponding to initial and repetitive diving.
[Dive Plan Display]
No. of next dive for
repetitive diving
(B)
(A)
(A)
Dive condition mark
[Dive Plan Display]
Oxygen concentration
(B)
(A)
(A)
%). Continuously displays the
2
[Dive Alarm Display]
Depth alarm
(A)
(A) (A)
Body nitrogen level graph
[Dive Alarm Display]
(A)
(A)
(A)
Dive time
alarm
(A)
(A)
(A)
55