Citizen D710 Instruction Manual page 92

(5) Confirm that [Install the software
automatically {Recommended}] is selected
and then click on "Next". The software is
automatically detected and will start
installing it .
Notice: It may take some time to detect the
software.
(6) After installation is completed, the screen
shown at right is displayed.
(7) Click on "Finish". Data can now be
transferred using the USB interface.
* After installing the USB driver, remove the CD-ROM from the CD-ROM drive and keep it in a
safe place.
* Installation of the USB driver is only performed once before transferring data using the
communication unit for the first time. It is no longer required to be installed prior to subsequent
data transfer. However, when transferring data using the communication unit for the first time
with a different PC, the driver must again be installed in that PC.
92
d