Switching The Mode - Citizen D710 Instruction Manual

Switching the Mode

• The mode of the standard mode changes in the order of time, travel time, destination
timer, alarm, chronograph, timer and system monitor each time the lower right button (A)
is pressed in the standard mode.
• The mode changes in the order of standard mode, dive plan mode, scuba diving log
mode, skin diving log mode and surface mode each time the lower left button (D) is
pressed.
• The watch automatically switches to the dive mode (preliminary dive display) when the
water sensor gets wet in any mode (excluding the infrared communication mode and low
power mode).
• The watch switches to the infrared communication mode (initial display) when the lower
left button (D) is pressed for at least 2 seconds and then released in any mode
(excluding the dive mode and low power mode).
Time
(D)
(D)
Surface
(only when activated)
[Dive Mode
(preliminary dive display)]
* Refer to the section on "Using the
Dive Mode" for further details.
28
[Standard Mode]
Travel time
(A)
(A)
System monitor
(A)
Skin Diving Log
(D)
If the water sensor gets wet
Destination timer
(A) (A)
Timer
(A)
Scuba Diving Log
(D)
[Infrared Communication
Mode (initial display)]
* Refer to the section on "Data
Communication Functions" for further
details.
Alarm
(A)
Chronograph
(A)
(D)
Dive Plan
(D)
The lower left button (D)
pressed for at least 2 seconds