Related Manuals for Citizen E100
Summary of Contents for Citizen E100
-
Page 1: Table Of Contents
Setting Instructions for Movement Caliber E100 Contents (click on a topic) Outline Specifications About Solar Powered Watches Setting the Time and Calendar Functions of the Solar Power Watch Time Required for Recharge Notes on Recharging About the Eco Drive Rechargeable Battery... -
Page 2: Outline
1.OUTLINE This watch is an analog solar powered timepiece that has a solar cell on its dial that converts the light into electrical energy to drive the movement. 2. Specifications Movement Caliber Number Accuracy Operating temperature range Display Time function... -
Page 3: Setting The Time And Calendar
Setting the Time and Calendar If your watch has a screw-type crown, unscrew the crown from the case loosen it before operation. Be sure to press the crown down and screw in after setting the time and/or date. <Setting the time>... -
Page 4: Functions Of The Solar Power Watch
• Insufficient Charge Warning Function • Quick Start Function The watch will stop if it is completely discharged. It will begin to operate soon after (within 10 second) it is exposed to light. (However, the time to start may vary according to the brightness of the light.) -
Page 5: Time Required For Recharge
Time required for recharge may vary according to the Caliber number, design (color of the dial, etc.) and operating environment. The following table will serve an approximate reference. "The recharging time is the time when the watch is continuously exposed to light." Running Time At Full Charge... -
Page 6: Notes On Recharging
Charging in a place that easily becomes hot, such as a dashboard. When you charge the watch by an incandescent lamp, take a distance about 50cm (20in.) from the light source to prevent any damage to the movement or any components from the high temperature radiated by incandescent light bulbs. - Page 7 I f a watch is wet from cleaning or by accident, never store it in a closed container. It should be dried immediately or taken to a watchmaker or jeweler if moisture is inside the case to prevent damage from rust.
-
Page 8: Water Resistance
Do not operate the crown or any push button when the watch is wet as this may allow the entrance of moisture. . If at anytime, you notice moisture in your timepiece that does not clear in a short period of time, you should send your timepiece as soon as possible to the nearest Authorized Service Center for inspection.