Using The Standard Mode; Using The Time Mode; Switching The Display - Citizen D710 Instruction Manual

Using the Standard Mode

1. Using the Time Mode

This mode is the basic mode of this watch that displays the time and date.
A. Switching the Display
• The display switches between the Day Display and Location Display each time the upper
left button (C) is pressed once.
• When the upper right button (B) is pressed once when either the Day Display or Location
Display is displayed, the display changes to the Enlarged Display. Pressing the upper
right button (B) again returns it to the original display.
[Day Display]
(C)
Month, date
(D)
Day
[Location Display]
(C)
Alarm ON
mark
Location
* When the charge of the watch becomes low (when the charge level indicator indicates
the "Day Display" or "Enlarged Display" automatically change to the "Location Display" after
about 3 minutes to indicate that the watch should be charged.
30
Time
(B)
Daily graphic
(A)
Dive Condition
Mark
(C)
Charge Level
Indicator
[Enlarged Display]
Time
(B)
(B)
),