Adjusting The Brake Pedal Position - Yamaha TDM900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Locknut (clutch lever)
2. Clutch lever free play adjusting bolt
3. If the specified clutch lever free
play could be
described above, tighten the
6
locknut and skip the rest of the
procedure, otherwise proceed as
follows.
4. Fully turn the adjusting bolt at the
clutch lever in direction a to
loosen the clutch cable.
2
1
a a
1. Locknut (crankcase)
2. Clutch lever free play adjusting nut
5. Loosen
obtained as crankcase.
6. To increase the clutch lever free
play, turn the adjusting nut in
direction a. To decrease the
clutch lever free play, turn the
adjusting nut in direction b.
7. Tighten the locknut at the clutch
lever and the crankcase.
2
1
b
a
the locknut at the
6-23
a. Distance between brake pedal and footrest
Adjusting the brake pedal
position
Br a ke pedal posi t i o n, adj u st i n g
The top of the brake pedal should be
positioned approximately
below the top of the footrest as
shown. Periodically check the brake
pedal position and, if necessary,
have a Yamaha dealer adjust it.
EAU00712
32 mm