Adjusting The Brake Pedal Position And Free Play - Yamaha TT-R230A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
braking performance, which may re-
sult in loss of control and an acci-
dent.
7
Adjusting the brake pedal po-
sition and free play
1. Brake pedal position
2. Brake pedal free play
WARNING
It is advisable to have a Yamaha
dealer make these adjustments.
Brake pedal position
The top of the brake pedal should be
positioned approximately 3.0 mm (0.12
in) below the top of the footrest. Period-
ically check the brake pedal position
and, if necessary, adjust it as follows.
1. Loosen the locknut at the brake
pedal.
7-18
EAUW0650 2. To raise the brake pedal, turn the
adjusting bolt in direction (a). To
lower the brake pedal, turn the ad-
justing bolt in direction (b).
3. Tighten the locknut.
WARNING
After adjusting the brake pedal posi-
tion, the brake pedal free play must
be adjusted.
Brake pedal free play
EWA10670
1. Adjusting bolt
2. Locknut
The brake pedal free play should mea-
sure 20.0–30.0 mm (0.79–1.18 in) as
shown. Periodically check the brake
pedal free play and, if necessary, adjust
it as follows.
EWA11230