Replacing A Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha TDM900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Socket
Replacing a tail/brake light
bulb
Tai l / b r a ke l i g ht bul b , r e pl a ci n g
1. Remove the seat. (See page
6
3-13 for seat removal and instal-
lation procedures.)
2. Remove the socket (together
with the bulb) by turning it coun-
terclockwise.
3. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the seat.
EAU04411
1. Screw
2. Turn signal light lens
Replacing a turn signal light
bulb
Tur n si g nal l i g ht bul b , r e pl a ci n g
6-37
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
EAU03497