Adjusting The Engine Idling Speed - Yamaha TDM900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
7. Install the air filter case cover by
installing the screws.
8. Place the fuel tank in the original
position and install the bolts.
w
8 Before installing the fuel tank,
make sure that the fuel hoses
are not damaged. If any fuel
hose is damaged, do not start
the engine but have a Yamaha
dealer replace the hose, other-
wise fuel may leak.
8 Make sure that the fuel hoses
6
are properly connected and
routed, and not pinched.
8 Be sure to place the fuel tank
breather hose and the fuel
tank overflow hose in the orig-
inal position.
9. Install the panels and cowlings.
10. Install the seat.
Adjusting the engine idling
speed
Engi n e i d l i n g speed
The engine idling speed must be
checked and, if necessary, adjusted
EWA00067
as follows at the intervals specified in
the periodic maintenance and lubrica-
tion chart.
The engine should be warm before
making this adjustment.
NOTE:
The engine is warm when it quickly
responds to the throttle.
EAU04578
1. Throttle stop screw
Check the engine idling speed and, if
necessary, adjust it to specification
by turning the throttle stop screw. To
increase the engine idling speed, turn
the
decrease the engine idling speed,
turn the screw in direction b.
NOTE:
If the specified idling speed cannot
be obtained as described above,
have a Yamaha dealer make the
adjustment.
6-17
screw in direction
Engine idling speed:
1,100–1,200 r/min
a.
To