Shift Pedal; Brake Lever; Brake Pedal - Yamaha TDM900 Owner's Manual

1. Shift pedal

Shift pedal
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch lever when
shifting the gears of the 6-speed con-
stant-mesh transmission equipped on
this motorcycle.
INSTRUMENT AND CONTROL FUNCTIONS

1. Brake lever

2. Brake lever position adjusting dial
EAU00157
3. Arrow mark
a. Distance between brake lever and handlebar
grip
Brake lever
The brake lever is located at the right
handlebar grip. To apply the front brake,
pull the lever toward the handlebar grip.
The brake lever is equipped with a po-
sition adjusting dial. To adjust the dis-
tance between the brake lever and the
handlebar grip, turn the adjusting dial
while holding the lever pushed away
from the handlebar grip. Make sure that
the appropriate setting on the adjusting
dial is aligned with the arrow mark on
the brake lever.

1. Brake pedal

Brake pedal
The brake pedal is on the right side of
the motorcycle. To apply the rear
EAU00161
brake, press down on the brake pedal.
3-8
3
EAU00162