Clutch Lever - Yamaha TDM900 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Engine stop switch "
2. Light switch " /
3. Start switch " "
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the motorcycle over-
turns or when the throttle cable is
stuck.
Light switch " /
Set this switch to "
auxiliary light, meter lighting and tail-
light. Set the switch to "
the headlight also. Set the switch to
" " to turn off all the lights.
Start switch "
Push this switch to crank the engine
with the starter.
CAUTION:
@
See page 5-1 for starting instruc-
tions prior to starting the engine.
@
/ "
/ "
EAU03890
/ "
" before starting
" to
EAU03898
/ "
" to turn on the
" to turn on
EAU00143
"
EC000005

1. Clutch lever

Clutch lever
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion
page 3-18 for an explanation of the ig-
nition circuit cut-off system.)
3-7
circuit cut-off system.
EAU00152
(See