INSTRUMENT AND CONTROL FUNCTIONS
3
1. Tachometer
2. Tachometer red zone
3. Clock
Tachometer unit
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
CAUTION:
_
Do not operate the engine in the ta-
chometer red zone.
Red zone: 12,500 r/min and above
_
This tachometer unit is equipped with a
clock.
To set the clock:
1. Push both the "SELECT" and
"RESET" buttons for at least two
seconds.
2. When the hour digits start flashing,
push the "RESET" button to set
the hours.
3. Push the "SELECT" button to
change the minutes.
4. When the minute digits start flash-
EAU03954
ing, push the "RESET" button to
set the minutes.
5. Push the "SELECT" button to start
the clock.
EC000003
NOTE:
_
After setting the clock, be sure to push
the "SELECT" button before turning the
key to "OFF", otherwise the clock will
not be set.
_
3-5