Ignition Circuit Cut-Off System - Yamaha Fazer FZS600 Owner's Manual

WARNING
@
The motorcycle must not be ridden
with the sidestand down, or if the
sidestand cannot be
moved up (or does not stay up), oth-
erwise the sidestand could contact
the ground and distract the opera-
tor, resulting in a possible loss of
control. Yamaha's ignition circuit
cut-off system has been designed to
assist the operator in fulfilling the
responsibility of raising the side-
stand before starting off. Therefore,
check this system regularly as de-
scribed below and have a Yamaha
dealer repair it if it does not function
properly.
@
INSTRUMENT AND CONTROL FUNCTIONS
EW000044

Ignition circuit cut-off system

The ignition circuit cut-off system (com-
prising the sidestand switch, clutch
switch and neutral switch) has the fol-
properly
lowing functions.
G
It prevents starting when the trans-
mission is in gear and the side-
stand is up, but the clutch lever is
not pulled.
G
It prevents starting when the trans-
mission is in gear and the clutch
lever is pulled, but the sidestand is
still down.
G
It cuts the running engine when
the transmission is in gear and the
sidestand is moved down.
Periodically check the operation of the
ignition circuit cut-off system according
to the following procedure.
EAU03741
_
_
3-16
WARNING
G
The vehicle must be placed on
the centerstand during this in-
spection.
G
If a malfunction is noted, have a
Yamaha dealer check the sys-
tem before riding.
EW000046
3