To Install The Front Wheel - Yamaha Fazer FZS600 Owner's Manual

5. Remove the plastic fastener hold-
ing the speed sensor lead and the
brake hose together.
6. While supporting the speed sen-
sor, pull the wheel axle out, and
then remove the wheel.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Speed sensor

To install the front wheel

1. Lift the wheel up between the fork
legs.
2. Install the speed sensor at the
wheel hub.
NOTE:
_
Make sure that the projections on the
speed sensor rotor are aligned with the
notches in the wheel hub and that the
slot in the speed sensor fits over the re-
tainer on the fork leg.
_
6-40
1. Speed sensor retainer
3. Insert the wheel axle.
EAU03575
4. Lower the front wheel so that it is
on the ground.
5. Push down hard on the handlebar
several times to check for proper
fork operation.
6. Install the brake calipers by install-
ing the bolts.
NOTE:
_
Make sure that there is enough space
between the brake pads before install-
ing the brake calipers onto the brake
discs.
_
7. Install the brake hose holders by
installing the bolts.
6