1. Starter (choke) lever "
"
Starter (choke) lever "
Starting a cold engine requires a richer
air-fuel mixture, which is supplied by
the starter (choke).
Move the lever in direction a to turn on
the starter (choke).
Move the lever in direction b to turn off
the starter (choke).
INSTRUMENT AND CONTROL FUNCTIONS
1. Seat lock
2. Unlock.
EAU03839
"
Seat
To remove the seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. While holding the key in that posi-
tion, lift the front of the seat up,
and then pull the seat off.
1. Projection
2. Seat holder
To install the seat
EAU01319
1. Insert the projection on the rear of
2. Push the front of the seat down to
3. Remove the key.
NOTE:
@
Make sure that the seat is properly se-
cured before riding.
@
3-12
the seat into the seat holder as
shown.
lock it in place.
3