Yamaha Fazer FZS600 Owner's Manual page 58

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Hose holder
13. Pull the hose holder off the frame.
6
14. Pull the hose down and to the out-
side while making sure to keep the
end up, and then tilt the hose
downward into the container to
drain the coolant reservoir.
NOTE:
@
Note the original routing of the radiator
overflow hose to ensure proper instal-
lation later on.
@
15. After the coolant is completely
drained, thoroughly flush the cool-
ing system with clean tap water.
16. Install the coolant drain bolt, and
then tighten it to the specified
torque.
6-15
NOTE:
@
Check the washer for damage and re-
place it if necessary.
@
Tightening torque:
Coolant drain bolt:
10 Nm (1,0 m·kgf)
17. Connect the radiator overflow
hose and make sure that it is prop-
erly routed.
18. Pour the recommended coolant
into the radiator until it is full.
Recommended antifreeze:
High-quality ethylene glycol
antifreeze containing corrosion
inhibitors for aluminum engines
Antifreeze/water mixture ratio:
1:1
Coolant quantity:
Total amount:
1.95 L
Coolant reservoir capacity:
0.61 L