Replacing The Tail/Brake Light Bulb - Yamaha Fazer FZS600 Owner's Manual

CAUTION:
@
Take care not to damage the follow-
ing parts:
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosi-
ty of the bulb, and the bulb life
will be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G Headlight lens
• Do not affix any type of tinted
film or stickers to the head-
light lens.
• Do not use a headlight bulb of
a wattage higher than speci-
fied.
@
4. Install the bulb cover, and then
connect the coupler.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
PERIODIC MAINTENANCE AND MINOR REPAIR
EC000104
1. Tail/brake light bulb socket
Replacing the tail/brake light
bulb
1. Remove the seat. (See page 3-12
for seat removal and installation
procedures.)
2. Remove the owner's tool kit.
3. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
4. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6-38
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the owner's tool kit.
8. Install the seat.
EAU00858
6