Speedometer Unit; Handlebar Switches - Yamaha DT125R Owner's Manual

Speedometer unit

1
4
y
6 0 8 0
1 0 0
4 0
1 2 0
2 0
1 3 0
0
3 2
1. Odometer
2. Tripmeter
3. Reset button
4. Coolant temperature warning lamp
The speedometer unit is equipped
with a speedometer, an odometer and
a tripmeter. The speedometer shows
riding speed. The odometer shows
the total distance traveled. The trip-
meter shows the distance traveled
since it was last set to zero with the
reset knob. The tripmeter can be used
to estimate the distance that can be
traveled with a full tank of fuel. This
information will enable you to plan
future fuel stops.
INSTRUMENT AND CONTROL FUNCTIONS
EAU11640 NOTE:
Only for the German model equipped
with a speed limiter:
The speed limiter prevents the vehicle
b j
from exceeding a riding speed of 80
N
z
km/h.

Handlebar switches

3
1. Dimmer switch "
2. Horn switch "
3. Turn signal switch "
4. Hazard switch " "
Dimmer switch "j/k"
Set this switch to "j" for the high
beam and to "k" for the low beam.
EAU12343
4 1
2
"
j/k
a
"
c/d "
EAU12400
3-3
Turn signal switch "c/d"
To signal a right-hand turn, push this
switch to "d". To signal a left-hand
turn, push this switch to "c". When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
Horn switch "a"
Press this switch to sound the horn.
Engine stop switch "f/e"
1. Stop switch " f / e "
2. Start switch " g "
Set this switch to "f" before starting
the engine. Set this switch to "e" to
EAU12460
3
EAU12500
EAU12660
1
2