Front Wheel (For Non-Abs Models) - Yamaha FZ1-S Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Front wheel (for non-ABS
models)
WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
6
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
EAU44791
EWA14840
3
2
1
EAU40062
1. Front wheel axle pinch bolt
EWA10821
2. Wheel axle
3. Brake caliper bolt
2. Place the vehicle on the center-
stand.
3. Remove the brake hose holder on
each side by removing the bolt and
nut.
4. Remove the brake caliper on each
side by removing
NOTICE: Do not apply the brake
after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.
[ECA11051]
1. Brake hose holder
2. Bolt and nut
3. Brake caliper bolt
4. Brake caliper
5. Pull the wheel axle out, and then
To install the front wheel
1. Lift the wheel up between the fork
the bolts.
2. Insert the wheel axle.
3. Install the brake caliper on each
TIP
Make sure that there is enough space
between the brake pads before install-
ing the brake calipers onto the brake
discs.
6-38
remove the wheel.
legs.
side by installing the bolts.
EAU40071