Adjusting The Front Fork - Yamaha FZ1-S Owner's Manual

Adjusting the front fork

WARNING
Always adjust the spring preload on
both fork legs equally, otherwise
poor handling and loss of stability
may result.
Each front fork leg is equipped with a
spring preload adjusting bolt, the right
front fork leg is equipped with a re-
bound damping force adjusting screw
and the left front fork leg with a com-
pression damping force
screw.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
INSTRUMENT AND CONTROL FUNCTIONS
EAU39335 load and
suspension, turn the adjusting bolt on
EWA14670
each fork leg in direction (b).
1. Spring preload adjusting bolt
adjusting
Align the appropriate groove on the ad-
justing mechanism with the top of the
ECA10101
front fork cap bolt.
1. Current setting
2. Front fork cap bolt
thereby soften the
3-22
Spring preload setting:
Minimum (soft):
8
Standard:
5.5
Maximum (hard):
0
Rebound damping force
The rebound damping force is adjusted
on the right front fork leg only. To in-
crease the rebound damping force and
thereby harden the rebound damping,
turn the adjusting screw in direction (a).
To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting screw in di-
rection (b).
TIP
Be sure to perform this adjustment on
the right front fork leg.
3