Front Wheel (For Non-Abs Models) - Yamaha MT09 Owner's Manual

Hide thumbs Also See for MT09:
Table of Contents

Advertisement

PERIODIC MAINTENANCE AND ADJUSTMENT
a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
6
Front wheel (for non-ABS
models)
WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
6-39
EAU44792
3
EWA14841
2
EAU56270
1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt
EWA10822
2. Lift the front wheel off the ground
according to the procedure in the
previous section "Supporting the
motorcycle".
3. Remove the brake caliper on each
side by removing the bolts.
NOTICE: Do not apply the brake
after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.
[ECA11052]
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt09a

Table of Contents