Front Wheel (For Non-Abs Models) - Yamaha FZ07HC 2016 Owner's Manual

Periodic maintenance and adjustment
Front wheel (for non-ABS
models)
WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
7
falling over.
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
EAU44792
3
EWA14841
2
EAU61492
1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt
EWA10822
2. Lift the front wheel off the ground
according to the procedure in the
previous section "Supporting the
motorcycle".
3. Remove the brake hose holder on
the left side by removing the bolt.
1
1. Brake hose holder
2. Bolt
3. Reflector
4. Brake caliper
5. Brake caliper bolt
4. Remove the reflector and the
5. Remove the wheel axle, and then
To install the front wheel
1. Lift the wheel up between the fork
7-39
5
brake caliper on each side by re-
moving the bolts. NOTICE: Do
not apply the brake after the
brake calipers have been re-
moved, otherwise the brake
pads will be forced shut.
remove the wheel.
legs.
1
2
3
4
[ECA11052]