Replacing The License Plate Light Bulb; Front Wheel (For Non-Abs Models) - Yamaha diversion F Owner's Manual

Periodic maintenance and adjustment
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. License plate light unit
2. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
1. License plate light bulb socket
2. License plate light bulb
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
EAU24314
Front wheel (for non-ABS
models)
WARNING
For the ABS model, have a Yamaha
1
dealer remove and install the wheel.
To remove the front wheel
2
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
1
3
2
2
1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt
2. Place the vehicle on the center-
stand.
3. Remove the brake caliper on each
side by removing the bolts.
NOTICE: Do not apply the brake
after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.
[ECA11052]
6-40
EAU44792
EWA14841
EAU56281
EWA10822
6
1