Care Of Cleaning Pockets; Decalcifying Steam Mop; Cleaning The Nozzle - Shark S3901UKL Owner's Manual

40°
fig. 32
CARE OF YOUR CLEANING POCKETS
1
We recommend washing your cleaning pocket
separately from other fabrics to avoid picking up
lint. For optimal cleaning performance pockets
may need to be washed up to (3) three times.
Only use liquid detergent (no powder
detergent). Do not use any fabric
softeners or bleach. Line dry. Do not tumble
dry. (fig. 32)
2 If there are loose threads on the cleaning pocket
carefully cut the thread with scissors. Do not pull
on them or cut at the base.(fig. 33)
IMPORTANT: The cleaning pocket may be very
hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes.
ORDERING REPLACEMENT PARTS
To order additional parts and accessories, feel free
to contact us at:
Shark Customer Services
PO Box 298
Mirfield
WF14 9BA
Freephone 0800 862 0453
fig. 33
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.

CLEANING THE NOZZLE

NOTE: To prevent clogging, it is recommended
that you periodically clean the Direct Steam
Nozzle and the extension hose stem with the
cleaning tool provided or a paper clip.
1 Your Handheld Steamer should not normally
require cleaning, however, should you notice
a decrease in the steam output, it may be
necessary to remove mineral deposits built up
around the nozzles.
2 Unplug the cleaner from the electrical outlet.
3 Use the provided nozzle cleaner or a small
diameter stiff metal wire, such as a straightened
metal paperclip, and carefully insert the end of
the wire into the nozzle orifice. See illustration
above. (fig. 34)
4 Move the wire back and forth several times to
remove any deposits.
5
Plug in the appliance to the power outlet and
test steam output.
PART
1 2 Cleaning Pockets
fig. 34
PART NO.
XT3701UKL
www.lakeland.co.uk 17