Care Of Cleaning Pockets; Decalcifying Steam Mop - Shark S3901 GEL Owner's Manual

Care of Your Steam Mop - cont.
40°
fig. 32
CARE OF YOUR CLEANING POCKETS
1
We recommend washing your cleaning pockets
separately from other fabrics to avoid picking up lint.
For optimal cleaning performance pockets may need
to be washed up to (3) three times. Only use liquid
detergent (no powder detergent). Don't use any
fabric softeners or bleach. Line dry. Do not tumble
dry. (fig. 32)
2
If there are loose threads on the cleaning pocket
carefully cut the thread with scissors. Don't pull on
them or cut at the base. (fig. 33)
IMPORTANT: The cleaning pocket may be very hot
from the steam. Use caution when removing. Let the
unit cool for 2-3 minutes.
ORDERING REPLACEMENT PARTS
To order additional parts and accessories, feel free to
contact us at:
Shark Customer Services
PO Box 298
Mirfield
WF14 9BA
Freephone 44 0800 862 0453
19 www.lakeland.co.uk
fig. 33
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can build up and impact
the performance of your steam mop over time. To
extend the life of your product we recommend that you
use distilled water.
CLEANING THE NOZZLE
NOTE: To prevent clogging, it is recommended that
you periodically clean the Direct Steam Nozzle and the
extension hose stem with the cleaning tool provided
or a paper clip.
1
Your Handheld Steamer should not normally require
cleaning, however, should you notice a decrease in
the steam output, it may be necessary to remove
mineral deposits built up around the nozzles.
2
Unplug the cleaner from the electrical outlet.
3
Use the provided nozzle cleaner or a small diameter
stiff metal wire, such as a straightened metal paper
clip, and carefully insert the end of the wire into the
nozzle orifice. See illustration above. (fig. 34)
4
Move the wire back and forth several times to
remove any deposits.
5
Plug in the appliance to the power outlet and test
steam output.
PART
1 2 Microfibre Pockets
fig. 34
PART NO.
XT3901UKL