Using Your Carpet Glider - Shark S3901UKL Owner's Manual

fig. 12
5 Use the scrub side of the cleaning pocket
to break up the tough stains. Then flip the
mop head over to use the shaggy side of
the cleaning pocket to lift up and lock away
all of the dirt and debris. (fig. 12)

Using Your Carpet Glider

THE CARPET GLIDER
1 The Carpet Glider can be used with the All-
Purpose Head to lightly steam your carpet and
area rugs. Just place the mop head with the
cleaning pocket attached into the glider. The
recommended steam setting is SCRUB when
using the Carpet Glider. (fig. 13)
6
fig. 13
2
When the water tank is empty, the Steam
Mop will stop producing steam. You can refill
the water tank at any time as long as the
mop is unplugged from the outlet. Follow
the instructions from page 5. This applies to
switching the mop head or the cleaning pocket
as well.
NOTE: Please wait 2-3 minutes for the Steam
Mop to cool off before switching the mop head
or the cleaning pocket. Never leave the Steam
Mop with a damp/wet pocket on any floor.
The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
Move the Steam Mop back and forth across a
section of the carpet. (fig. 14)
www.lakeland.co.uk
fig. 14
9