Care Of Your Steam Mop - Shark STEAM POCKET S3450 Owner's Manual

Care of Your Steam Mop

fig. 14
fig. 15
AFTER USE AND STORAGE
1
When you have finished using
the steam mop, press the STEAM
CONTROL button until the LED light
turns flashing BLUE. This stops the
unit from steaming. Unplug the cord
from the outlet and place the mop
into the upright position. Let the unit
cool for 2-3 minutes.
Remove the micro-fiber cleaning pad
by releasing the quick fasteners and
using the lavender loop on the side
of the pocket, avoiding contact with
the hot pad or dirt. (fig. 14)
8 TOLL FREE: 1-800-798-7398
2
Empty the water tank before
storage. Open the water tank door
and empty the tank over a sink.
Close the water cap. (fig. 15)
3 To store the Shark
Steam Pocket
®
remove the head (after it has cooled
and the steam has been released)
then hang on a large hook. (fig. 16)
fig. 16
® Professional SLIM
Mop hanging up, first