Honda 08B08-MCH-100 Installation Instructions Manual page 8

13. Store the connectors in the harness boot.
WIRE TIE
AUDIO HARNESS
14. Insert the audio harness sub cord terminal into the
jack holder as shown.
AUDIO HARNESS SUB
CORD TERMINAL
Apply isopropyl alcohol
to the terminal and insert
fully into the jack holder.
8 of 10
AUDIO HARNESS
WIRE TIE
JACK HOLDER
CAP
Close the cap
when it is not used.
08B08-MCH-1000-91
15. Attach the jack holder in the position shown.
VTX1800C/F/N
VTX1800R/S/T
JACK HOLDER
Thoroughly clean the area where the
jack holder will be attached and remove
the adhesive backing before attaching.
© 2006 American Honda Motor Co., Inc - All Rights Reserved.
JACK HOLDER
Thoroughly clean the area where
the jack holder will be attached
and remove the adhesive
backing before attaching.