Table of Contents
Advertisement
17. Sit on the motorcycle and adjust the speaker so it
faces toward you. Tighten the speaker holders
securely.
• Move the handlebar right and left and check
that the harnesses are not pinched by
components and that they are not pulled taut.
Tighten the upper bolt first, then tighten the lower bolt.
UPPER
HOLDER
LOWER
SPEAKER
Align the center of the speaker with the
SPEAKER
center of the motorcycle and secure it.
SURFACE
18. Install the removed motorcycle parts in the reverse
order of removal.
19. Connect the sub cord as shown when it is used.
JACK HOLDER
SUB CORD
20. Install the clip on the sub cord and attach it to the
motorcycle in a way that it does not interfere with riding
the motorcycle.
CLIP
Thoroughly clean the
area where the clip will
be attached and remove
the adhesive backing
before attaching.
21. Check the controller, speaker, headlight and the other
lights for proper operation. Check that the harnesses
are not pulled taut.
© 2006 American Honda Motor Co., Inc - All Rights Reserved.
Page 10
- Quick Links:
- Installation Instructions
Hide quick links:
Advertisement
Table of Contents
