Da-Lite Designer Contour® Specification Data

Designer Contour
Spring Roller-Type Screen
SUGGESTED SPECIFICATIONS:
(H) x (W), wall or ceiling mounting type. Screen case to
be a two piece design made of extruded aluminum. Case to be finished in
white, lightly textured powder coat. End caps made of high strength plastic
concealing roller ends with integral bearing surface to support roller. To be
equipped with Controlled Screen Return (CSR) to control the return speed of
the screen into the case. Bottom of fabric shall be mounted securely into a
powder coated tubular steel slat. Ends of slat shall be protected by plastic
caps. A 36" pull cord with plastic knob is included. To have masking borders
standard on flame retardant and mildew resistant fiberglass fabric. Fabric shall
be mounted into a metal strip in a Camlok® roller system without tape, glue,
staples, or cords so that fabric may be easily replaced yet cannot be pulled
from roller.
Viewing Area (H x W)
In. Cm
43" x 57" 109 x 145
50" x 67" 127 x 170
57" x 77" 145 x 196
60" x 80" 152 x 203
69" x 92" 175 x 234
Viewing Area (H x W)
In. Cm
371/2" x 67" 95 x 170
45" x 80" 114 x 203
52" x 92" 132 x 234
60" x 60"
70" x 70"
84" x 84"
6' x 8'
8' x 8'
Manual with CSR
®
projection screen(s),
Video (NTSC 4:3) Format Dimensions
Nominal Diagonal
In.
72"
84"
96"
100"
120"
HDTV (16:9) Format Dimensions
Nominal Diagonal
In.
77"
92"
106"
Square Format Dimensions
Sizes (H x W)
In. Cm
152 x 152
178 x 178
213 x 213
183 x 244
244 x 244
Overall Length of Case
Cm In.
183 63"
213 73"
244 84"
254 87"
305 99"
Overall Length of Case
Cm In.
196 73"
234 87"
269 99"
Overall Length of Case
In. Cm
63" 160
73" 185
87" 221
99" 251
99" 251
SPECIFICATION DATA
Approx. Ship. Wt.
Cm Lbs.
160 25
185 30
213 33
221 37
251 38
Approx. Ship. Wt.
Cm Lbs.
185 30
221 37
251 38
Approx. Ship. Wt.
Lbs. Kg
25 11.3
30 13.5
37 16.8
38 17.2
39 17.7
Kg
11.3
13.6
15.0
16.8
17.2
Kg
13.6
16.8
17.2