Network Pin Code; Network Information - Christie L2K1000 User Manual

Chapter 2 Setup Procedures

Network PIN code

The Network PIN code is to restrict the access to the projector through the network.
After setting the Network PIN code, you need to enter it to operate the projector via the
networks.
1. Select "Network PIN code" in the Network menu, and press SELECT button.
The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point ed buttons and move to the next items with the Point 7
8 buttons. Select "Set" and press SELECT button to set. To cancel the preset Network PIN
code, select "Cancel". When you do not want to set the Network PIN code, set "0000".
It is recommended to set the Network PIN code if you use the projector via the networks.
The Network PIN code can be set also through the networks. See "3. Basic setting and
operation" ➔ "Initial setting" ➔ "Network PIN code setting" (p.23).
* You can also enter the Network PIN code with the number buttons on the remote control.
Network PIN code
Network PIN code screen

Network information

Select "Network information" in the Network menu and press Point 8 or SELECT button
to show LAN setting environment of the currently selected projector. (The description
below is an example and different from what will be shown.)
* The numerical value is a setting example.
14
L2K1000 Network User Manual
020-00395-01 Rev.1 (04-2011)