Table of Contents
Advertisement
3. Enter the code authorized to access other
partition(s).
If the code is accepted, the system displays
the partitions that user has access to.
NOTE: A code may have access to some (but
not all) of the available partitions.
This screen displays the available partitions (in
this case, Partitions 1 and 2), and their current
status.
The current partition is shown at the top of the
display (in this example, the device is attached
to Partition 1 (P1)). To change this
assignment, select the appropriate button (e.g.
press P2 to switch control to Partition 2).
How to Send Emergency Messages
An emergency message for medical, panic or fire can be sent to the central
monitoring station from the
accessed by activating the "emergency" icon located in the lower-right hand corner
of the displayed screen (see next page for a typical screen).
1. The Emergency screen cannot be accessed while running a diagnostic test or the touch
screen calibration.
2. In some instances a pop-up window may be partially covering the "emergency" icon. If this is
the case, you should first close the pop-up window by pressing either the DONE or CANCEL
button, whichever may be appropriate, on the pop-up screen.
ACTION
Emergency
Security System Operation (Cont'd)
Emergency
screen. The
SCREEN
screen can be
"EMERGENCY"
ICON
AUI-006
27
Advertisement
Table of Contents
