Panic Alarms; Trouble Conditions; Emergency Keys - ADT Safewatch Pro 3000 System Manual

Safewatch Pro 3000 System Manual
Bypassing zones allows you to arm your system with one or more zones intentionally unprotected. The
system must be disarmed before arming. Fire zones cannot be bypassed.
1. Enter your security number + 6 + two digit zone number (e.g., 06, 10, etc.).
2. Once all bypassed zones are displayed on the touchpad, continue to arm the system as usual.
Door Chime (Entry/Exit Beeps)
To turn the door chime function on or off, press and hold the Chime key for 2 seconds or enter [security
code] + [9].

Panic Alarms

Emergency Keys

Your system may have been programmed to use special keys to manually active emergency (panic)
functions. To active a panic function, press and hold down the designated lettered key for at least 2
seconds or press both keys of the designated key pair at the same time.
Function
Silent Alarm
Audible Alarm
Personal Alarm
Fire Alarm

Trouble Conditions

Trouble conditions are indicated by the word CHECK and continual beeping from the touchpad. Any key
will silence the beeping. A display of CHECK + zone no. may indicate that a problem requires your
attention. Check the specified zone area, close any open doors or windows and enter your security code
and press [OFF]. If your system includes wireless sensors, the CHECK condition may be caused by some
change in the environment of the protected area.
To silence trouble beeps, press any key or enter your security code and press [OFF].
For a complete list of Trouble Conditions, please refer to the
https://alpha.adt.com/help/63[11/12/2018 9:41:21 PM]
Signal to Customer Care
Silent alarm
Audible alarm
Emergency alarm
Fire alarm
Sound Activated
No audible alarm to indicate
silent alarm has been activated
but message sent to Customer
Care
A loud, steady alarm on touchpad
and any sounders
Steady alarm at touchpad
Pulsing sound at external bells
and sirens
Safewatch and Ademco Systems