Table of Contents
Advertisement
User Code Setup (cont'd)
How to Set Up a User Code for TeleSMART Use Only
Users that have access to the security system, Internet, and TeleSMART should be
programmed in the procedure described in Section: User Codes. Users that are to
have access only to the TeleSMART options (no security or Internet options) must
be programmed here using the procedure described below.
TeleSMART user numbers and user codes are independent from security system
codes, but, if desired, TeleSMART can let you control your security system from a
telephone by assigning codes as follows:
If TeleSMART user code is...
Unique to TeleSMART system,
Same as a security system user code,
Important Feature!
iCenter, iCenter can automatically retrieve that user's memos/messages upon
system disarm.
To set or change a User Code:
1. From the "Home" screen, press the
MESSAGES button to display the
"TeleSMART" main screen.
2. Press the SETUP button. The system
enters the "TeleSMART Setup" screen.
42
That user can access...
TeleSMART system only.
Both TeleSMART and security systems.
If the same code is used for both the TeleSMART user and
ACTION
SCREEN
Advertisement
Table of Contents
