With The On-The-Go Emergency Response System - ADT Health Fall Detection Pendant User Manual

Using the Pendant with the On-the-Go
Emergency Response System
If you Fall
The Fall Detection Pendant takes 20 to 30 seconds to
interpret the movement and determine whether an actual
fall has occurred. If it determines that a fall has occurred:
The Fall Detection Pendant sends a signal to the Mobile

Device.
The Pendant sounds a series of beeps and the light flashes red for 20 seconds.

The Mobile Device sounds three (3) double beeps and the red ring around the

gray Emergency button lights up for several seconds, and then fades out.
To cancel, press and hold the blue Emergency Help button on the Fall Detection

Pendant for five (5) seconds until three (3) beeps are heard. This cancels the alert.
14 ADT Health Customer Support 800.568.1216
®