Table of Contents
Advertisement
etting the
ystem Time Using the Tele
S
S
01
02
Hear Messages
Record Memo
NAVIGATION: [ ] = Next Option; [#] = Previous Option; [7] = GOTO prompt; [9] = Exit System.
About the System Time
The internal clock is used to time-stamp all messages. Although TeleSMART will
indicate this as an option, iCenter will always provide system time to the
TeleSMART. This menu should only be used with a 6139T TeleSMART Touchpad to
set or view the system's time setting.
How to Set the System Time
PROGRAM MODE
07 SYSTEM TIME
SYSTEM TIME
SUN 12:00AM
SET TIME?
1-YES 8-MENU
DAY? – WEDNESDAY
* - NEXT 0-SELECT
ENTER HOUR
-- (01=12)
ENTER MINUTES
-- (00-59)
ENTER AM/PM
- 1AM 2PM
SYSTEM TIME
SUN 12:00AM
When finished, press [8] to return to the Main Menu, or press [9] to exit the system
TeleSMART Messaging Features (Cont'd)
03
04
Caller ID Log
Privacy On/Off
1. Go to the "System Time" prompt (option 07) and press [0].
2. The current time setting is displayed for five seconds.
The system automatically advances to the next prompt.
3. Press [1] (yes) to begin setting the day and time.
To cancel and return to the Main Menu, press [8].
4. Press [ ] until the correct day of the week appears, then press [0]
to select it.
The system automatically advances to the next prompt.
5. Enter the current hour (use 2-digit entries; e.g., 09 for 9 o'clock).
The system automatically advances to the next prompt.
6. Enter the current minute (use 2-digit entries).
The system automatically advances to the next prompt.
7. Enter the "AM" or "PM" setting by pressing "1" for AM or "2" for
PM.
The system automatically advances to the next prompt.
8. The system displays the day and time, then automatically returns
to the "Set Time" prompt described above.
R T Touchpad ( O ption 07)
M
A
S
05
06
Record OGM
System On/Off
07
08
System Time
CID Display
.
6
9
Advertisement
Table of Contents
