Table of Contents
Advertisement
ync With Network Clock
If
S
whenever iCenter checks in with the server (every 10 seconds) it will get the
current GMT time. If the iCenter time differs from GMT by 10 seconds or more,
the iCenter time will be reset.
ync With Network Clock
If
S
iCenter will send time to TeleSMART and the control panel every hour. This 1-
hour timer starts on iCenter power-up or when
selected if it was not set at power-up.
ync With Network Clock
If
S
control panel time will be updated when iCenter time is set and you hit the
button.
Daylight Savings Time is processed internal to the iCenter, since iCenter gets
GMT from the server. When iCenter adjusts for DST, the next time the 1-hour
timer expires, the new value should be sent to the control panel.
MPOR
AN
This means that the iCenter setting will override and overwrite the
I
T
T:
control panel time setting. That is, if the control panel is set to DST and adjusts but
iCenter is not, upon the 1-hour timer expiration, the control panel will be updated to
the current iCenter time that is not adjusted for DST.
et
ime & Date
From the
S
T
chart, select the corresponding
pressing the "increase" or "decrease" arrow buttons.
et
ime & Date
From the
S
T
pressing the "increase" or "decrease" arrow buttons as necessary until the proper
month, day, year, hour, and minute are displayed.
BUTTON
is selected on the
is selected on the
O T selected on the
is N
screen, while referring to the Time Zones Settings
ime Zone
T
screen adjust either or both the time and date by
OK
Set T
me & Date Screen
i
iCenter Setup (Cont'd)
et
ime & Date
S
T
et
ime & Date
S
T
ync With Network Clock
S
et
S
T
for the location of the iCenter by
CANCEL
BUTTON
screen,
screen,
is
ime & Date
screen,
OK
INCREASE
BUTTON
(TYPICAL)
DECREASE
BUTTON
(TYPICAL)
AUI-009-V0
117
Advertisement
Table of Contents
