Front Wheel Removal - Honda VT750C Owner's Manual

07/08/01 19:10:55 32MEG630_093
WHEEL REMOVAL
Refer to the Safety Precautions on page
This motorcycle is equipped with a side
stand only. Therefore, if front or rear wheel
removal is required, it will be necessary to
raise the center of the motorcycle with a
jack or other firm support. If none is
available, see your Honda dealer for this
service.

Front Wheel Removal

1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Loosen the right and left axle pinch bolts
( ), and remove the front axle bolt ( ). 1
Do not depress the brake lever when the
62 . wheel is off the motorcycle. The caliper
pistons will be forced out of the cylinders
with subsequent loss of brake fluid. If this
occurs, servicing of the brake system will be
necessary. See your Honda dealer for this
service.
2
(2)
(1) Axle pinch bolts
(2) Front axle bolt
(1)
83