Braking - Honda VT750C Owner's Manual

07/08/01 19:07:18 32MEG630_067

BRAKING

For normal braking, apply both the brake
pedal and lever while down-shifting to
match your road speed. For maximum
braking, close the throttle and firmly apply
the pedal and lever; pull in the clutch lever
before coming to a complete stop to prevent
stalling the engine.
Important Safety Reminders:
Independent operation of only the brake
lever or brake pedal reduces stopping
performance.
Extreme application of the brake controls
may cause wheel lock, reducing control of
the motorcycle.
When possible, reduce speed or brake
before entering a turn; closing the
throttle or braking in mid-turn may cause
wheel slip. Wheel slip will reduce control
of the motorcycle.
When riding in wet or rainy conditions, or
on loose surfaces, the ability to maneuver
and stop will be reduced. All of your
actions should be smooth under these
conditions. Rapid acceleration, braking or
turning may cause loss of control. For
your safety, exercise extreme caution
when braking, accelerating or turning.
When descending a long, steep grade,
use engine compression braking by down-
shifting, with intermittent use of both
brakes.
Continuous brake application can
overheat the brakes and reduce their
effectiveness.
Riding with your foot resting on the
brake pedal or your hand on the brake
lever may actuate the brakelight, giving a
false indication to other drivers. It may
also overheat the brakes, reducing
effectiveness.
57