Honda VT750C Owner's Manual page 31

07/08/02 17:11:23 32MEG630_031
Adjust by turning the rear brake adjusting
nut a half-turn at a time. Make sure the cut-
out on the adjusting nut is seated on the
brake arm pin ( ) after making final 5
freeplay adjustment.
3. Apply the brake several times and check
for free wheel rotation after the brake
lever is released.
(5) Brake arm pin
If proper adjustment cannot be obtained by
this method, see your Honda dealer.
After adjustment, push the brake arm ( )
to confirm that there is a gap between the
adjusting nut ( ) and the brake arm pin ( ).
(4)
(4) Adjusting nut
(5) Brake arm pin
After adjustment, confirm the freeplay of
(5) the brake pedal.
Other Checks:
Make sure the brake rod, brake arm, spring
and fasteners are in good condition.
6
4 5
(6)
(5)
(6) Brake arm
21