Honda VT750C Owner's Manual page 95

07/08/01 19:11:13 32MEG630_095
3. Tighten the axle pinch bolts on the left
fork leg to the specified torque:
22 N·m (2.2 kgf·m , 16 lbf·ft)
4. Tighten the axle bolt to the specified
torque:
59 N·m (6.0 kgf·m , 44 lbf·ft)
5. Operate the front brake and pump the
fork several times.
Check for free wheel rotation after the
brake lever is released. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
6. If the clearances between each surface of
the brake disc and the brake bracket ( )
(not the brake pads) are symmetrical,
follow next step.
If the clearances are not symmetrical,
loosen the left axle pinch bolts and pull
the left fork outward or push inward to
adjust the clearance. Then follow the next
step.
7
85