Getting Started; Technical Data - Topcom SMP-1000 User Manual

5

Getting started.

5.1 Important
• Do not use directly on your skin. Use clothing or a cloth to protect your skin and aid in hygiene.
• Do not massage a body part more often than every second day.
• Each use of the massager should be limited to 30 minutes. Massaging at one point should be
limited to 3 minutes.
5.2 Using the massager
• Connect the small plug of the AC power adapter to the power adapter Jack (2) and the other end of
the adapter cable to the electric socket (230V/50Hz).
Only use the power adapter supplied (DC 12V, 2A). Do not use other adapters, as this may
damage the device.
The wall outlet for the power supply must be close and easy accessible.
1. Set the power switch (1) to position I to activate the shiatsu massager rotating counter clockwise.
2. Set the power switch (1) to position 0 to stop the massager.
3. Set the power switch (1) to position II to activate the shiatsu massager rotating clockwise.
To disconnect, turn the power switch controls to the off position (0), then remove the plug from
the outlet.
5.3 How and where to massage
1
2
3
6

Technical data

Dimensions (W/H/D)
Weight
Rated voltage
Rated power
7 Cleaning
• Disconnect the device and allow it to cool down.
TOPCOM SMP-1000
1. Shoulder/Neck
4
2. Back
3. Calves
4. Feet
5. !!! Do not sit or stand on the
massager.
5
420 x 290 x 41 mm
2Kg
Input: AC 100 ~ 240V/50-60 Hz
Output: DC 12V 2A
24W
TOPCOM SMP-1000
5