Specifications - Yaesu FT-2600M Operating Manual

Specifications

General
Frequency Range:
Channel Steps:
Frequency Stability:
Mode of Emission:
Antenna Impedance:
Supply voltage:
Current Consumption(typical): Rx: less than 1 A (max. signal)
Operating Temperature Range: -20º to +60º C (-4º to +140º F)
Case Size (WHD):
Weight:
Transmitter
Output Power:
Modulation Type:
Maximum Deviation:
Spurious Radiation:
Microphone Impedance:
Receiver
Circuit Type:
Intermediate Frequencies:
Sensitivity (for 12dB SINAD):
Selectivity (-6/-60dB):
IF Rejection:
Image Rejection:
Maximum AF Output:
Specifications subject to change without notice or obligation.
Specifications guaranteed only within the amateur band.
Frequency range and repeater shift may vary according to local requirements and regula-
tions.
2
Tx: 144-146 or 144-148 MHz
Rx: 144-146 MHz or 134-174 MHz
5/10/12.5/15/20/25/50 kHz
Better than ±10 ppm (-20º to +60º C)
F3 (G3E)
50 W, unbalanced
13.8 V DC (±10 %), negative ground
less than 0.4 A (squelched)
Tx: 10 A (60 W)/ 6 A (25 W)/4 A (10 W)/3 A (5 W)
160 x 40 x 160 mm (6.3" x 1.6" x 6.3")
(W/o knobs/connectors)
1.3 kg (2.9 lb.)
60W/25W/10W/5W
Variable Reactance
±5 kHz /±2.5 kHz
Better than –60 dB
2 k
Double-Conversion Superheterodyne
21.7 MHz & 450 kHz
Better than 0.2 µV @ 15 kHz bandwidth
12 / 30 kHz or 10/24 kHz
Better than 70 dB
Better than 70 dB
3.5 W into 4 @10 % THD
FT-2600M O M
PERATING ANUAL