Front Panel Controls And Switches - Yaesu FT-2600M Operating Manual

Front Panel Controls and Switches

(1) (9)
(2) (3)
(1) Power / VOL Knob
Turn this control clockwise to turn the radio on and to increase the volume.
Counterclockwise rotation into the click-stop will turn the radio off.
(2) Microphone Jack
This 6-contact modular jack accepts transmit audio, tone call (burst) or Dial / Memory
selection, and Scanning control from the microphone.
Pin 1: S 2 (Multi-function switching)
W
Pin 2: Cloning
Pin 3: +9V
Pin 4: GND
Pin 5: Microphone Input
Pin 6: S 1 (Multi-function switching)
W
(3) MHz (SET) Key
This button allows tuning in 1-MHz steps (the MHz digits will blink on the display). If
receiving on a memory, pressing this button the first time activates the Memory Tune (MT)
mode, and pressing it again enables 1-MHz steps.
Press and hold this key for one second to activate the "Set" (M
(4) REV (LOW) Key
During split-frequency operation, such as through a repeater, this button reverses the trans-
mit and receive frequencies.
Press and hold this key for one second to change the transmitter power output level.
The available power levels are:
H (60W) L
IGH OW
4
(4) (5) (6)
1 (25W) L 2 (10W)
OW
(8)
(7)
) Mode.
ENU
L 3 (5W) H
OW IGH
FT-2600M O
PERATING
(60W). . .
M
ANUAL